1. Verify that all wires are properly insulated and have no exposed wiring.
Properly insulated wiring is essential for preventing electrical fires and other hazards. The inspector should check each wire for any signs of wear or tear that may have caused the insulation to be compromised. If any exposed wiring is found, appropriate repairs must be made before the system can be used safely.
2. Check outlets for cracks, fraying or other damage.
Outlets serve as the connection point between a power source and an appliance or device. The inspector should check all outlets for any signs of damage, such as cracks or fraying that could lead to dangerous electrical shocks. Any damaged outlets must be replaced before they can be used safely.
3. Test switches to make sure they’re in good working condition.
Switches are used to control the flow of electricity to various devices and appliances. The inspector should check each switch for proper operation by flipping them on and off. Any switches that fail to work properly must be repaired or replaced before they can be used safely.
4. Inspect circuit breakers for rust, corrosion or other damage.
Circuit breakers serve as safety devices that protect the electrical system from overloads by automatically cutting off the power when too much electricity is flowing. The inspector should check each circuit breaker for any signs of damage, such as rust or corrosion, which can cause them to fail and expose users to potential hazards
5. Make sure panel boxes are tightly closed and secured.
Panel boxes act as a junction for all the wires of an electrical system. The inspector should make sure that each panel box is tightly closed and properly secured to prevent unauthorized access.
6. Check light fixtures for loose wiring or cracked glass.
Light fixtures provide illumination to a space, but they must be checked for any signs of damage. The inspector should check each fixture for loose wiring or cracked glass that can lead to potential safety hazards.
7. Look for any signs of water damage around electrical components.
Water and electricity do not mix, so the inspector should check all wiring, outlets, switches and other components for any signs of water damage. Any wet areas must be repaired before they can be used safely.
8. Ensure all electrical installations meet building codes.
The inspector should make sure that all the electrical components and installations meet the applicable building codes. This is essential for ensuring that the electrical system is safe to use and compliant with safety regulations.
