1. Check the wiring for the correct size and type:
It is important to check the wiring for the correct size and type before installation, as different wires have different amperages and temperatures that they can handle.
2. Inspect all electrical boxes:
Make sure that all of the electrical boxes are in good condition with no signs of corrosion or damage.
3. Check grounding connections:
Grounding connections should be checked to ensure proper protection from electric shock.
4. Verify conduit lengths:
Conduit lengths need to be verified to make sure that there is enough slack for any bends or turns needed during installation.
5. Review existing circuits:
Existing circuits should be reviewed to make sure that they can handle any additional loads that may be added when new wiring is installed.
6. Label all wires:
Labeling each wire will ensure that any future maintenance and repairs can easily be identified.
7. Perform a visual inspection:
A visual inspection should be done to make sure that nothing is loose or damaged, and that the installation meets local codes and regulations.
8. Test devices and circuits:
Once the wiring has been installed, it’s important to test all devices and circuits to make sure they are working properly before being connected to a power source.
9. Document results:
It is important to document the results of all inspections so they can easily be referred back to if ever needed in the future. This also gives a record of all inspections that have been completed.
10. Final Inspection:
A final inspection should be done after all electrical work has been completed to make sure everything meets safety and code requirements.
11. Re-inspect for defects:
After the first initial inspection, a re-inspection should be done to check for any potential defects or problems that may have occurred during installation.
12. Inspect the outside of the home or building:
Lastly, an inspection of the outside of the home or building should be performed to make sure there are no exposed wires or other dangerous conditions present. This will help ensure the safety of both occupants and visitors.