1. Make sure the forklift is turned off and the key is removed:
Before starting any work on the forklift, be sure to turn it off and remove the key. This will help avoid any accidental starts that could cause injury.
2. Check the brake system for damage or leaks:
The brake system is one of the most important safety features on a forklift. Be sure to check for leaks or damage and fix any issues as soon as possible.
3. Test the steering for proper operation:
The steering should be tested for proper operation before each use. If there are any problems, they should be fixed immediately.
4. Inspect the tires for wear and tear:
Tires play an important role in safety, so it's important to check them for wear and tear before each use. If they are worn down, they should be replaced as soon as possible.
5. Check the load capacity to ensure it is within safe limits:
Be sure to check the load capacity before each use to ensure it is within safe limits. Putting too much weight on the forklift can cause accidents and injuries.
6. Look for any signs of damage to the forklift, such as cracks or dents:
If you spot any damage to the forklift, report it immediately so that it can be fixed. Damaged forklifts can be dangerous to operate.
7. Ensure all guards and shields are in place and in good condition:
Guards and shields play an important role in safety, so be sure to check them for damage or wear and tear before each use. If there are any problems, they should be fixed immediately.
8. Make sure all fluid levels are correct:
Be sure to check all fluid levels before each use and fill up or replace any fluids as needed. Low fluid levels can cause serious problems when operating a forklift.
9. Check that all lights are working properly:
Make sure all lights are working properly before using the forklift in order to avoid accidents caused by poor visibility.
10. Start up the forklift and check for any unusual noises:
Start up the forklift and listen for any unusual noises that could indicate a problem with the machine. If you hear anything strange, stop using the forklift and have it checked out by a technician.