1. Check for any visible dirt, dust and debris on all surfaces:
It is important to check for dust on all surfaces, including floors, walls, counters, furniture, cabinets, and other areas of the salon. Any dust that is present should be swept or vacuumed up with a HEPA-filtered vacuum cleaner. Additionally, any areas that have dirt or grime should be wiped down with a damp cloth or sanitary wipe.
2. Ensure all tools are cleaned, sanitized and properly stored:
All of the tools used for beauty services (e.g., scissors, combs, brushes) must be thoroughly washed in hot soapy water and then disinfected with an appropriate sanitizer before being put away. All tools should also be stored in dust-proof containers to limit contact with dust particles that could cause contamination.
3. Make sure that towels and linens are clean, in good condition and free of stains:
Linens such as towels and gowns used during beauty services should always be freshly laundered and free from stains and tears before being used. Any towels that are stained or torn should be immediately removed from service and replaced with fresh ones.
4. Monitor the temperature of hot water at sinks:
It is essential that all handwashing facilities have hot water that reaches a minimum temperature of 100°F (37.8°C). This will ensure optimal sanitation during beauty services, as well as prevent potential burns to employees and clients alike.
5. Inspect proper cleaning procedures for supplies (e.g., combs, brushes):
Proper cleaning procedures must be followed when cleaning tools such as combs and brushes in order to eliminate any bacteria or viruses present on them. This includes washing them in hot soapy water followed by immersing them in a disinfectant solution.
6. Examine anti-bacterial wipes/sprays to ensure they meet state requirements:
It is important to check that all anti-bacterial wipes and sprays used at the salon are compliant with local laws and regulations. Some states may require specific types of products or certain concentrations of active ingredients. It is also essential that these products are stored correctly, as improper storage can lead to product contamination.
7. Confirm appropriate garbage disposal practices in salon areas:
Salon waste must be disposed of properly in order to avoid potential health risks such as contamination from bacteria or viruses on materials like paper towels, tissues, and cloth gowns. All trash should be placed in secure, covered receptacles and disposed of on a regular basis.
8. Verify shampooing chairs are wiped down after each use:
Another important sanitation practice is the wiping down of shampooing chairs with a sanitizing solution after each use. This will help to limit the spread of bacteria or viruses present on surfaces, as well as reduce the risk of spreading communicable diseases between customers and employees.
9. Inspect electrical outlets for safety hazards:
It is important to check that all electrical outlets in the salon are free of exposed wires, loose connections or other safety hazards. Any issues should be addressed immediately and repaired by a qualified electrician.
10. Look out for any violations of fire safety laws:
The salon should also be regularly inspected for any violations of fire safety laws. This includes checking that smoke detectors and other fire extinguishing equipment are in working order, as well as ensuring there are no blocked exits or faulty wiring present. Any issues should be addressed immediately to ensure the safety of all clients and employees.
11. Inspect for any signs of mold or mildew:
It is important to check for any signs of mold or mildew, as these can lead to serious health risks if left untreated. Any areas in the salon that show evidence of mold growth should be thoroughly cleaned and disinfected. Additionally, it is important to address any underlying issues such as leaky pipes or poor ventilation that could be contributing to the problem.
12. Make sure all equipment is in good working order and does not pose a safety hazard:
All equipment used in the salon should be inspected to ensure it is in good working order and does not pose a safety hazard. This includes checking that curling irons, hair dryers, and other tools are functioning properly, as well as examining electrical cords for any signs of fraying or damage. Any faulty equipment should be repaired or replaced immediately.
13. Check that the ventilation system is clean, clear and properly maintained:
It is also important to make sure that the ventilation system in the salon is clean, clear and properly maintained. This will ensure that air quality remains high and reduce the risk of infection or other health problems for employees and customers alike. The filter should be changed regularly and any problems with the air circulation should be addressed immediately.
14. Ensure proper storage of hazardous materials and chemicals:
All hazardous materials and chemicals used in the salon should be stored properly to ensure safety. This includes keeping them out of reach of children, as well as labeling any containers so that employees can easily identify them. Additionally, these items should only be handled by those with appropriate training and protective gear.
15. Make sure employees are wearing appropriate protective clothing (e.g., gloves) when handling chemicals or other products that could cause skin irritation:
Employees should also be required to wear appropriate protective clothing, such as gloves, when handling any chemicals or other products that could cause skin irritation. This will help to reduce the risk of any potential health issues associated with exposure to these materials. Additionally, employees should be trained on how to properly store and dispose of hazardous materials in order to maintain safety standards.
16. Guarantee emergency exits are clearly marked and accessible:
In the event of an emergency, it is essential that all exits in the salon are clearly marked and easily accessible. This will ensure that customers and employees can quickly evacuate the premises if necessary. Any blocked exits, or those without proper signage, should be addressed immediately to prevent any potential safety hazards.
17. Validate the salon meets all applicable laws, regulations and standards set by the local health department or other governing body:
Finally, the salon should be certain to meet all applicable laws, regulations and standards set by the local health department or other governing body. This will help to ensure that the establishment is compliant with all safety requirements and provide a safer environment for everyone. Regular inspections and audits should be conducted to guarantee these standards are being adhered to.