St Louis County Occupancy Inspection Checklist

It is important to have an occupancy inspection checklist for St Louis County in order to ensure that all dwellings meet the minimum health and safety standards. These standards are established by the county in order to protect the residents who live within its boundaries. The checklist helps protect people by making sure that dwellings meet code requirements, such as fire safety, hazardous materials storage, and ventilation. It also checks for any infestations of pests, animals, or insects which can pose a health risk if left unchecked. Additionally, it ensures that rental properties are up to code so that renters are not subjected to unsafe and unhealthy living conditions, such as mold or lead paint exposure.

Details for St Louis County Occupancy Inspection Checklist

1. Properly functioning smoke detectors.

Smoke detectors must be mounted in each bedroom and on every floor of the dwelling. They must be tested regularly and replaced as needed.

2. Clear, unobstructed exits and paths of travel.

The dwelling must have clear and unobstructed paths of travel leading to all exits. Stairs, hallways, and other areas should be free from clutter and debris.

3. Safe and secure locks on all doors and windows.

The dwelling must have secure locks on all exterior doors and windows.

4. No evidence or signs of pest or animal infestations.

The dwelling should be free of any pests, animals, or insects. If evidence is found, an exterminator must be called to properly address the issue.

5. Proper storage of hazardous materials (paints, chemicals, etc.).

Hazardous materials must be stored in a secure location away from living areas and out of reach of children.

6. Adequate ventilation throughout the dwelling.

The dwelling must have functioning windows and fans to ensure proper air circulation.

7. A safe water temperature for showers and sinks.

The water temperature for showers and sinks must be set to a safe level (no higher than 120 degrees Fahrenheit). Hot water tanks must also be tested for safety

FAQ for St Louis County Occupancy Inspection Checklist

1. How often should smoke detectors be tested?

Smoke detectors should be tested at least once a month to ensure that they are functioning correctly. If the detector is not working, it should be replaced immediately. Additionally, all battery-operated smoke detectors must have their batteries changed every six months

2. What is the minimum clearance required for paths of travel?

The minimum clearance required for any path of travel leading to an exit must be at least 36 inches wide and 80 inches high from the finished floor to the finished ceiling. Any obstructions in this area must be removed before occupancy inspection can take place

3. Are there any restrictions on the types of locks used for entryways?

Yes, locks for entryways must meet certain security requirements in order to pass inspection. Deadbolts and chain locks are generally accepted, but other types may require additional certification or approval from local authorities before being approved by inspectors

4. How do I address an infestation issue prior to occupancy inspection?

If evidence of an infestation is found during the initial assessment, an exterminator should be called in to properly address the issue prior to the occupancy inspection taking place. This will help ensure that all safety standards are met during the inspection process and tenants are protected from potential health risks caused by pests or animals living within the dwelling unit

5. Does my dwelling need a ventilation system?

Yes, all dwellings must have adequate ventilation throughout the dwelling unit in order to meet code requirements and pass occupancy inspection. The ventilation system should provide a consistent level of fresh air throughout all living spaces in order to limit humidity levels and reduce airborne contaminants such as mold spores or dust particles that can cause respiratory issues or allergies if left unchecked

6. Is there a maximum temperature setting for showers and sinks?

Yes, water temperature settings for showers and sinks must not exceed 120 degrees Fahrenheit in order to prevent scalding or burns when using these fixtures within a dwelling unit. Hot water tanks must also be tested for safety at least once per year if they are present within the premises being inspected for occupancy purposes

7 What other safety concerns should I consider prior to occupancy inspection?

In addition to checking smoke detectors and hazardous materials storage, you should also inspect lighting fixtures throughout your dwelling unit as well as any electrical wiring systems present within it prior to occupancy inspection taking place in order to ensure that there are no electrical hazards that could potentially pose a risk of injury or fire hazards if left unchecked.

In Summary

A St Louis County Occupancy Inspection Checklist is an invaluable tool for landlords and tenants alike. It helps to ensure that all necessary requirements are met prior to occupancies, such as smoke detectors, adequate ventilation, and a safe water temperature for showers and sinks. Additionally, the checklist also covers other safety concerns such as hazardous materials storage, lighting fixtures, and electrical wiring systems. An inspection will help protect tenants from potential health risks due to pests or animals living within the dwelling unit, as well as from any fire hazards that may be present.

ChecklistComplete